StayLive actively promotes the sharing of information as soon as possible after near miss or actual safety incidents to inform members about hazards arising out of their operations.
10 July 2018
On both the 10th and 12th July, a wind-authorised technician failed to open an isolation valve to drain the hydraulic system pressure.
27 June 2018
The BoP operator proceeded to unlock the LV 690v double doors of a TX Kiosk and then stood back, took a photo of the blushing, closed the double doors and then locked the LV door.
27 June 2018
A 'do not operate' tag had been attached to an extension cord back in 2015 due to the plug being deemed as unsafe.
13 June 2018
While travelling, a ute gull wing toolbox catch became loose and resulted in the toolbox hatch accidentally opening.
31 May 2018
Trip activation failed to trigger the Emergency Shutdown System
26 April 2018
Meter tampering caused voltage to be present on load side terminal after isolation.
24 April 2018
A reminder to include corrective actions after events. During the course of an investigation, contributing factors are identified which enables us to find root cause. Each contributing factor requires a barrier for safety. Barriers are designed into corrective actions.
24 April 2018
Wrong unit was isolated during scheduled maintenance. The impact of this event was not significant, however, working on un-isolated equipment could have severe consequences.
24 April 2018
While lifting work bags with internal crane, the hooks safety latch was observed to not be closed properly due to overcrowding of the hook.
19 April 2018
A metal roof plate fell from an upper storey while being cleaned with a vibration needle gun. The plate slipped off the 20mm flange that was holding it.
