StayLive actively promotes the sharing of information as soon as possible after near miss or actual safety incidents to inform members about hazards arising out of their operations.
13 July 2022
During a lift to refit the blades after a yaw ring replacement a loud thud was heard from inside the drop zone.
6 July 2022
During work with a drilling rig, a metal plate became detached from the top drive.
6 July 2022
While removing casing from a geothermal, a joint of 10 3/4" casing came free from the elevators it was lifted with.
30 June 2022
Following the Test-Prove-Test procedure was critical to identifying fault on a wind turbine circuit breaker.
30 June 2022
Worker at risk of being run over by trailer due to unplanned movement of the tow vehicle.
29 June 2022
Incorrect lifting eye was used resulting in failure.
14 June 2022
An electrician contacted a live motor heater circuit and received a 230VAC electric shock and burn to the hand.
13 May 2022
During a Hydro Rehab Project preassembly activity for G2. This event occurred when a rotor fan ring weighing 3,975kg was being lifted from a transport frame on a delivery truck using the power-house crane.
30 March 2022
Cellphone fell while working on turbine.
30 March 2022
At approximately 50-metre height, two technicians were working on a turbine blade repair when the crane had suddenly stopped. The crane operator informed the technicians he could not fix the fault himself and required assistance - stranding the two technicians.
